| Cross Members Legs to Rear Subframe | 4" Steel 80,000 PSI I-Beam Cross members with 4 Rivet End Clips on 12" Center Line |
|---|
| Floor Joint Sealant | Caulking Applied Prior to Assembly between each Joint |
|---|
| Floor Type | 1-3/8" Laminated Hardwood Floor with 2 Screws per Board |
|---|
| Floor Undercoat | Pre-Coated with Black Sealer on Bottom of Wood Floor |
|---|
| Front Corner Post | .080" Extruded Aluminum 4-3/4" Radius Front Corner Posts |
|---|
| Front Wall Lining | 1/2" Plywood Lower 48". 1/4" Nominal Hardwood above the Ceiling |
|---|
| Front Wall Posts | (4) 2" 14 Gauge High Tensile 50 Steel Hat-Shaped Front Wall Posts |
|---|
| Hendrickson Air Ride Systems with Integral Axes | Hendrickson® HKANT 40K Air Ride/Slider System |
|---|
| Hub Piloted System with Outboard Drums | Outboard Cast Drums for 16-1/2"x 7" Brakes |
|---|
| Inside Width | 101" Inside Width at Wearband |
|---|
| Length | 53' 0" Overall Length |
|---|
| Lower Clearance Lights | Grote® Micronova® L.E.D. PC-Rated Light |
|---|
| Main Harness | UTM Moisture-Resistant 6-Wire Harness with Internal Ground and 7-Way Plug |
|---|
| Oil Seals | National® 5 Star Oil Seal for 5-year Warranty |
|---|
| Overall Height | 13' 6" Overall Height on 46-1/2" 5th Height |
|---|
| Rear Case & Buckplate Material | Satin Finish Stainless Steel Rear Door Frame and Buckplate |
|---|
| Rear Door Hinges | 4 Aluminum Rear Door Hinges per Door |
|---|
| Rear Door Lock Rods | 1 per Door |
|---|
| Rear Door Type | 3/4" Ply Metal |
|---|
| Rear Header Clearance Lights | Grote® Micronova® L.E.D. Grommet-Mounted Rear Header Identification/Clearance |
|---|
| Rear Subframe Finish | Rust Preventative Coating |
|---|
| Rear Treadplate | .219" High Tensile x 27" Deep Steel Rear Threshold Integral with Rear Buckplate |
|---|
| Roof Bows | 1-1/16" Anti-Snag Galvanized Steel Roof Bows 16" Center Line; (Front and Rear Subframe 24" Center Line) Bonded to Roof Skin |
|---|
| Side Posts | 1-1/8" Galvanized High Tensile Hat Posts on 24" Center Line with Surface Mounted Plywood Lining |
|---|
| Side Wall Lining | Pre-painted White Galvanized Steel "Anti-Snag" Sidewall Lining |
|---|
| Slider Pin Release Mechanism | Hendrickson® Quik-Draw Air-Operated Slider Repositioning System |
|---|
| Slider Suspension Location | 70" Rear and 166" Forward Suspension Location for 96" of Slider Travel |
|---|
| Stop/Tail/Turn Light Configuration | Grote® 4" L.E.D. Stop/Tail/Turn Lights |
|---|
| Support Leg Finish | Rust Preventative Coating |
|---|
| Wearband | 18 Gauge 12" High Corrugated Steel |
|---|
