| Conduit | UTM Black Enamel Finish with Primer Undercoat on all Steel Show Surfaces; Aluminum Parts in Natural Finish. Black Rust Preventative Coating on Cross members, Undercarriage and Inboard Surface on Main Beams. |
|---|
| Cross Members | 3" Steel I-Beam Cross members on 16" Center Line Full Length |
|---|
| Fixed Air Ride Suspension Location | Suspension Location at 90-1/2" Center Line to Rear |
|---|
| Floor Type | 1-1/8" Extruded Aluminum Flat Top Floor with 4 Hardwood Nail Strips |
|---|
| Front Subframe Assembly Finish | 1/4" Steel Approach Plate |
|---|
| Hendrickson Air Ride Systems with Integral Axes | Hendrickson AANT 23K Intraax Air Ride |
|---|
| Hub Piloted System with Outboard Drums | Outboard Cast Drums for 16-1/2"x 7" Brakes |
|---|
| Kingpin Type | 1/2"x 4" 80,000 PSI Bottom Flange |
|---|
| Main Harness | UTM Moisture Resistant 6-Wire Cable Harness with Internal Ground and 7-Way Plug |
|---|
| Oil Seals | National® 5 Star Oil Seal for 5-year Warranty |
|---|
| Outriggers | 3 Aluminum Tube Outriggers Each Side |
|---|
| Payload Capacity | 80,000 lbs. Payload Capacity |
|---|
| Pipe Spools | Extruded Aluminum on 24" Center Line Centered between Pockets (Meets "Trailer Cargo Anchoring Device" Requirement) |
|---|
| Rubber Dock Bumpers on Rear Rail | (2) 3-1/2" Rubber Bumpers Mounted on Rear Rail |
|---|
| Side Rail | Extruded Aluminum Side Rail with Integral Track on Roadside and Curbside for Sliding Winches |
|---|
| Stop/Tail/Turn Light Configuration | Grote 4" L.E.D. Stop/Tail/Turn Lights |
|---|
| Top Flange | Hat Section 80,000 PSI Top Flange |
|---|
