| ABS Warning Light | 5" Diameter Axle |
|---|
| Conduit | UTM Black Enamel Finish with Primer Undercoat on all Steel Show Surfaces; Aluminum Parts in Natural Finish. Black Rust Preventative Coating on Cross members, Undercarriage and Inboard Surface on Main Beams. |
|---|
| Cross Members | 3" Steel I-Beam Cross members on 12" Center Line Full Length |
|---|
| Fixed Air Ride Suspension Location | Fixed Suspension Location at 94" Center Line to Rear |
|---|
| Floor Type | 1-1/8" Extruded Aluminum Flat Top Floor with 4 Hardwood Nail Strips |
|---|
| Front Pockets | 7 Gauge High Tensile Steel Outside-type Front Pockets |
|---|
| Front Rail | Carbon Steel Bolt-on Front Rail |
|---|
| Front Subframe Assembly Finish | 1/4" Steel Approach Plate |
|---|
| Hub Piloted System with Outboard Drums | Outboard Cast Drums for 16-1/2"x 7" Brakes |
|---|
| Kingpin Type | 1/2"x 4" 80,000 PSI Bottom Flange |
|---|
| Main Harness | UTM Moisture Resistant 6-Wire Cable Harness with Internal Ground and 7-Way Plug |
|---|
| Oil Seals | National® 5 Star Oil Seal for 5-year Warranty |
|---|
| Outriggers | 3 Steel Tube Outriggers Each Side |
|---|
| Payload Capacity | 80,000 lbs. Payload Capacity |
|---|
| Pipe Spools | Steel Pipe Spools on 24" Center Line Centered between Pockets (Meets "Trailer Cargo Anchoring Device" Requirement) |
|---|
| Rear Corners | 1/2" x 6" Steel Plate Rear Corners |
|---|
| Rear Pockets | Steel Outside-type Rear Pockets |
|---|
| Rear Rail | Carbon Steel Bolt-on Rear Rail |
|---|
| Rub Rail | 1/4" x 3" High Tensile Steel Rub Rail |
|---|
| Rubber Dock Bumpers on Rear Rail | (2) 3-1/2" Rubber Bumpers Mounted on Rear Rail |
|---|
| Side Pockets | 7 Gauge High Tensile Steel Outside-type Side Pockets |
|---|
| Side Rail | 4-7/16" 7 Gauge High Tensile Steel Bolt-on Side Rail |
|---|
| Spring Suspension | Holland Binkley SP9000 Spring Suspension with 49" Axle Spacing |
|---|
| Springs | 3 Leaf Steel Springs |
|---|
| Stop/Tail/Turn Light Configuration | Grote 4" L.E.D. Stop/Tail/Turn Lights |
|---|
| Top Flange | 1/4" x 6-1/2" High Tensile Steel 80,000 PSI Formed Channel Top Flange |
|---|
