| ABS | Bendix® TABS-6 2S/1M ABS System With SR-5 Spring Brake Valve |
|---|
| Cross Member Floor Fillers | Full Length Hardwood Floor Fillers |
|---|
| Cross Members Legs to Rear Subframe | 5-1/2" Aluminum I-Beam Cross members with 4 Rivet End Clips on 12" Center Line |
|---|
| Cross Members over Rear Subframe | 5-1/2" Aluminum I-Beam Cross members with 4 Rivet End Clips on 12" Center Line |
|---|
| Floor Thickness | 3" Floor |
|---|
| Floor Type | 1-3/8" Heavy-Duty Extruded Aluminum Duct Floor with Integral 10" Heavy-Duty Extruded Aluminum Non-Tapered Wearband. Fork Lift Reinforcing is for a 16,000 Load on the Front Axle of the Fork Truck |
|---|
| Floor Underskin | .040" Versitex |
|---|
| Fork Lift Reinforcing | Bearing Grid System at Rear with Full Length Hardwood Fillers & Aluminum I-Cores Rear 36" of Floor in Center 68". 1 Additional Cross member at Rear for Maximum 6" Center Line at Rear 34" |
|---|
| Front Corner Post | .080" Extruded Aluminum 4-3/4" Radius Front Corner Post |
|---|
| Front Corner Post Inserts | Stainless Steel Front Corner Post Inserts |
|---|
| Front Wall Lining | .065" Versitex |
|---|
| Front Wall Thickness | 4" Front Wall |
|---|
| Hendrickson Air Ride Systems with Integral Axes | Hendrickson® HKANT 40K Air Ride/Slider System |
|---|
| Hub Piloted System with Outboard Drums | Outboard Cast Drums for 16-1/2"x 7" Brakes |
|---|
| Insulation Type | Polyurethane Insulation Foam-In-Place |
|---|
| Length | 53' 0" Overall Length |
|---|
| Lower Clearance Lights | Grote® Micronova® L.E.D. PC-Rated Light |
|---|
| Main Harness | UTM Moisture Resistant Harness with Internal Ground and 7-Way Plug |
|---|
| Oil Seals | National® 5 Star Oil Seal for 5-year Warranty |
|---|
| Overall Height | 13' 6" Overall Height on 46-1/2" 5th Height |
|---|
| Rear Case & Buckplate Material | Stainless Steel Rear Door Case for Satin Finish Swing Doors |
|---|
| Rear Door Hinges | 4 Hinges per Door |
|---|
| Rear Door Lock Rods | 1 Lock Rod per Door |
|---|
| Rear Door Thickness | 3" Rear Doors |
|---|
| Rear Door Type | UTM Barrier® Design Double Rear Doors |
|---|
| Rear Header Clearance Lights | Grote® Micronova® L.E.D. Grommet-Mounted Rear Header Identification/Clearance Light |
|---|
| Rear Subframe Finish | Black Scharpf |
|---|
| Roof Lining | .065" Versitex |
|---|
| Roof Thickness | 3" Roof |
|---|
| Rubber Dock Bumpers | 1 Pair Rubber Dock Bumpers |
|---|
| Side Panels | .040" Aluminum Flat Side Panels |
|---|
| Side Posts | 1" J-Shape Extruded Aluminum Side Posts with 16" Maximum Center Line from Front to Rear of Support Legs with 24" Center Line Legs to Rear 2 Additional Posts each side over Front Subframe |
|---|
| Side Wall Lining | .065" Versitex-Utility VR2 Lining |
|---|
| Side Wall Thickness | 2" Side Wall |
|---|
| Slider Pin Release Mechanism | Hendrickson® Quik-Draw Air-Operated Slider Repositioning System |
|---|
| Slider Suspension Location | 70" Rear and 166" Forward Suspension Location for 96" of Slider Travel |
|---|
| Stop/Tail/Turn Light Configuration | Grote® 4" L.E.D. Stop/Tail/Turn Lights |
|---|
| Support Leg Finish | Black Scharpf |
|---|
| Wearband | 10" High 3/16" Thick Heavy-Duty Extruded Aluminum Non-Tapered Integral Wearband with Floor |
|---|
