| Conduit | UTM Black Enamel Finish with Primer Undercoat on all Steel Show Surfaces; Aluminum Parts in Natural Finish. Black Rust Preventative Coating on Cross members, Undercarriage and Inboard Surface on Main Beams. |
|---|
| Cross Members | 3" Steel I-Beam Cross members on 16" Center Line Full Length (Rearmost 3 Cross members on 12" Center Line) |
|---|
| Curtain Color | White |
|---|
| Curtain Material | Cross-linked Rip Stop Polyester |
|---|
| Curtain Rollers | Nylon Curtain Roller |
|---|
| Curtain Wearbands | 10" Double-Thick Curtain |
|---|
| Deck Type | 4" Wedge |
|---|
| Floor Type | 1-1/8" Extruded Aluminum Flat Top Floor Full Width (Provides a 9,000 lb. Fork Truck Front Axle Load) |
|---|
| Front Corner Post | 7 Gauge Formed Steel |
|---|
| Front Gooseneck Depth | 8-5/8" Front Gooseneck Depth |
|---|
| Front Panels | .050" Pre-painted White Aluminum |
|---|
| Front Subframe Assembly Finish | 1/4" Steel Approach Plate |
|---|
| Front Wall Attachment | Grote® Sealed Beam 2-1-2-3 Clearance Light Package (11 lights total) |
|---|
| Front Wall Lining | 1/4" Plywood |
|---|
| Front Wall Posts | 2" Extruded Aluminum |
|---|
| Gross Vehicle Weight Rating | 65,000 lbs. GVWR |
|---|
| Hendrickson Air Ride Systems with Integral Axes | 5" Diameter Axle |
|---|
| Hub Piloted System with Outboard Drums | Outboard Cast Drums for 16-1/2"x 7" Brakes |
|---|
| Kingpin Type | 1/2"x 4" 80,000 PSI High Tensile Steel Bottom Flange |
|---|
| Length | 53' 0" |
|---|
| Main Harness | UTM Moisture Resistant 6-Wire Cable Harness with Internal Ground and 7-Way Plug |
|---|
| Oil Seals | Stemco® Guardian® HP Oil Seal. (Guardian HP or Discover Seal Required for Stemco 5-Year Platinum Performance Warranty) |
|---|
| Outriggers | 3 Aluminum Tube Outriggers Each Side |
|---|
| Overall Height | 13' 6" on a 48"Fifth |
|---|
| Payload Capacity | 55,000 lbs. Payload Capacity |
|---|
| Pelmet | Heavy-Duty Rubber |
|---|
| Rear Case & Buckplate Material | Carbon Steel |
|---|
| Rear Case Corner Posts & Header | Quick Release Rear Corner Post |
|---|
| Rear Door Hinges | 4 Rear Door Hinges |
|---|
| Rear Door Lock Rods | 1 Rear Door |
|---|
| Rear Door Panels | 3/4" Ply Metal |
|---|
| Roof Exterior Finish | 1-3/8" Extruded Aluminum Hat-Shaped Bows on 24" Center Line |
|---|
| Roof Skin | .040" Aluminum |
|---|
| Rubber Dock Bumpers on Rear Rail | (2) 3-1/2" Rubber Bumpers Mounted on Rear Rail |
|---|
| Side Posts | 2 Removable Side Posts on each Side |
|---|
| Side Rail | 5-3/8" Deep Tautliner Extruded Aluminum Full Length Side Rail with Integral Winch Track on Road Side and Curb Side |
|---|
| Slider Suspension Location | 69" Rear and 159" Forward Suspension Location for 90" of Slider Travel |
|---|
| Spring Suspension | Holland Binkley SP9000 Series Spring Suspension |
|---|
| Springs | 3 Leaf Steel Springs |
|---|
| Stop/Tail/Turn Light Configuration | Grote 4" L.E.D. Stop/Tail/Turn Lights |
|---|
| Top Flange | Hat Section 80,000 PSI High Tensile Steel Top Flange |
|---|
| Top Front & Top Side Rail Finish | Extruded Aluminum |
|---|
| Vertical Tensioning Strap | 1-3/4" Wide Nylon on 24" Center Line (each Strap is rated at 2,500 lbs.) |
|---|
