5-Year Stemco® Platinum Performance Wheel End System
The Stemco Platinum Performance wheel end system includes Guardian® HP oil seals, PRO-TORQ® spindle nuts and Integrated Sentinel® hubcaps. The entire system is warranted for five years and covers both parts and labor.
Air Ride Suspension
Standard air ride suspension is designed in, not just added as an option. The result is lower tare weight and more available payload. Standard 96" slider travels provides more versatility for weight distribution, maneuverability and bridge law compliance.
Landing Leg Support and Bracing
High-tensile steel wing plates with collared holes and embossed ribs provide maximum strength and lower tare weight. Formed channel x-braces distribute leg forces into the full width of the leg.
LED Lights
LED stop,tail and turn lights plus LED clearance and marker lights on top rails and rear header provide up to 10,000 hours of service, lowering maintenance cost.
Patented Barrier Rear Doors
A bonded foam "sandwich" design features less heat loss with greater durability, while external-mounted hardware guarantees no moisture path to foam cavity.
Tensioned Roof Skin
The roof skin is tensioned like a drum and is bonded to the foam insulation for increased strength. Edges are mechanically formed around top rails to reduce moisture intrusion and insure thermal efficiency.
Utility-Designed Door Hardware
Provides greater gathering ability and easier locking. Features standard aluminum hinges and standard center cam increasing door stiffness and reducing air loss.
5-Year Stemco® Platinum Performance Wheel End System
The Stemco Platinum Performance wheel end system includes Guardian® HP oil seals, PRO-TORQ® spindle nuts and Integrated Sentinel® hubcaps. The entire system is warranted for five years and covers both parts and labor.
Landing Leg Support and Bracing
High-tensile steel wing plates with collared holes and embossed ribs provide maximum strength and lower tare weight. Formed channel x-braces distribute leg forces into the full width of the leg.
Tensioned Roof Skin
The roof skin is tensioned like a drum and is bonded to the foam insulation for increased strength. Edges are mechanically formed around top rails to reduce moisture intrusion and insure thermal efficiency.
Wiring Harness System
Internally grounded system, with soldered joints and molded connectors, offers maximum life expectancy and minimum maintenance costs. Proprietary system is warranted for 10 years.
5/16" Thick Dock Board Guide Plates
Protects the rear of the floor from dock plate damage. Increases durability and reduces maintenance costs.
Foam-In-Place Insulation
High-pressure foam-injection system completely fills all cavities with no foam voids, guaranteed. The state-of-the-art process lowers heat lost for greater thermal efficiency and lower fuel costs.
Highest-Rated Floor System
Features 16,000 lb dynamic fork truck capacity floor, 100% hardwood floor fillers,patented floor attachment system, Standard fork truck package includes: aluminum I beam floor cores, (1) additional cross member and all aluminum support grid at the rear.
Integrated Heavy-Duty 10" High Wearband
Provides greater protection against fork truck impacts. 3/16" thick, full-height. No exposed fasteners to back out or leak moisture into foam insulation.
LED Lights
LED stop,tail and turn lights plus LED clearance and marker lights on top rails and rear header provide up to 10,000 hours of service, lowering maintenance cost.
Tensioned Roof Skin
The roof skin is tensioned like a drum and is bonded to the foam insulation for increased strength. Edges are mechanically formed around top rails to reduce moisture intrusion and insure thermal efficiency.
Thermal Barriers
This low conduction barrier between the threshold and buckplate reduces heat transfer for greater thermal efficiency. The 3000R® has been designed with strategically placed thermal barriers to optimize thermal performance.
