The sealed main harness features 100% soldered internal connectors to prevent corrosive de-icing chemicals from traveling through connections into the wiring.
This design optimizes load distribution between the axles and extends suspension life.
Tri-axle suspension options with 49″, 60″ and 72″ spread axles provide higher payload capacity.
Corrosion resistant frame reduces maintenance costs and increases resale value. The 110 1/2″ door opening height allows increased forklift clearance.
Coil packages from 50,000 lb to 57,000 lb are available to match your specific requirements.
Galvanized interior lining is squeeze riveted with fully recessed fasteners to outer skin and side posts, creating a Snag-Free®, high strength, composite wall.
Flooring is pre-undercoated to extend floor life. Weatherproof sealant is applied between every floorboard, Utility-designed gaskets are installed between the troughs and bottom rails for leak protection.
Built with a fiberglass layer on the underside of each plank, the high strength design of a composite floor supports heavier payloads and decreases moisture entry into the floor.
Engineered and track tested to create optimal side wall strength, the design also provides 100″ of inside width, and greater cargo securement versatility.
Built with a fiberglass layer on the underside of each plank, the high strength design of a composite floor supports heavier payloads and decreases moisture entry into the floor.